ide_atareg.h

Go to the documentation of this file.

/*      $OpenBSD: atareg.h,v 1.12 2004/09/24 07:15:22 grange Exp $      */
/*      $NetBSD: atareg.h,v 1.5 1999/01/18 20:06:24 bouyer Exp $        */
 
/*
 * Copyright (c) 1998, 2001 Manuel Bouyer.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Manuel Bouyer.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
#ifndef _DEV_ATA_ATAREG_H_
#define _DEV_ATA_ATAREG_H_
 
#if defined(__linux__)
#include <endian.h>
 
#elif defined(__sun)
#include <sys/isa_defs.h>
 
#else
#include <machine/endian.h>
 
#endif
 
#ifdef LITTLE_ENDIAN
#define ATA_BYTE_ORDER LITTLE_ENDIAN
#elif defined(BIG_ENDIAN)
#define ATA_BYTE_ORDER BIG_ENDIAN
#elif defined(_LITTLE_ENDIAN)
#define ATA_BYTE_ORDER 1
#define LITTLE_ENDIAN 1
#elif defined(_BIG_ENDIAN)
#define ATA_BYTE_ORDER 0
#define LITTLE_ENDIAN 1
#else
#error "No endianess defined"
#endif
 
/*
 * Drive parameter structure for ATA/ATAPI.
 * Bit fields: WDC_* : common to ATA/ATAPI
 *             ATA_* : ATA only
 *             ATAPI_* : ATAPI only.
 */
struct ataparams
{
    /* drive info */
    uint16_t    atap_config;            /* 0: general configuration */
#define WDC_CFG_ATAPI_MASK              0xc000
#define WDC_CFG_ATAPI                   0x8000
#define ATA_CFG_REMOVABLE               0x0080
#define ATA_CFG_FIXED                   0x0040
#define ATAPI_CFG_TYPE_MASK             0x1f00
#define ATAPI_CFG_TYPE(x)               (((x) & ATAPI_CFG_TYPE_MASK) >> 8)
#define ATAPI_CFG_TYPE_DIRECT           0x00
#define ATAPI_CFG_TYPE_SEQUENTIAL       0x01
#define ATAPI_CFG_TYPE_CDROM            0x05
#define ATAPI_CFG_TYPE_OPTICAL          0x07
#define ATAPI_CFG_TYPE_NODEVICE         0x1F
#define ATAPI_CFG_REMOV                 0x0080
#define ATAPI_CFG_DRQ_MASK              0x0060
#define ATAPI_CFG_STD_DRQ               0x0000
#define ATAPI_CFG_IRQ_DRQ               0x0020
#define ATAPI_CFG_ACCEL_DRQ             0x0040
#define ATAPI_CFG_CMD_MASK              0x0003
#define ATAPI_CFG_CMD_12                0x0000
#define ATAPI_CFG_CMD_16                0x0001
/* words 1-9 are ATA only */
    uint16_t    atap_cylinders;         /* 1: # of non-removable cylinders */
    uint16_t    __reserved1;
    uint16_t    atap_heads;             /* 3: # of heads */
    uint16_t    __retired1[2];          /* 4-5: # of unform. bytes/track */
    uint16_t    atap_sectors;           /* 6: # of sectors */
    uint16_t    __retired2[3];
 
    uint8_t     atap_serial[20];        /* 10-19: serial number */
    uint16_t    __retired3[2];
    uint16_t    __obsolete1;
    uint8_t     atap_revision[8];       /* 23-26: firmware revision */
    uint8_t     atap_model[40];         /* 27-46: model number */
    uint16_t    atap_multi;             /* 47: maximum sectors per irq (ATA) */
    uint16_t    __reserved2;
    uint8_t     atap_vendor;            /* 49: vendor  */
    uint8_t     atap_capabilities1;     /* 49: capability flags */
#define WDC_CAP_IORDY   0x0800
#define WDC_CAP_IORDY_DSBL 0x0400
#define WDC_CAP_LBA     0x0200
#define WDC_CAP_DMA     0x0100
#define ATA_CAP_STBY    0x2000
#define ATAPI_CAP_INTERL_DMA    0x8000
#define ATAPI_CAP_CMD_QUEUE     0x4000
#define ATAPI_CAP_OVERLP        0x2000
#define ATAPI_CAP_ATA_RST       0x1000
    uint16_t    atap_capabilities2;     /* 50: capability flags (ATA) */
#if ATA_BYTE_ORDER == LITTLE_ENDIAN
    uint8_t     __junk2;
    uint8_t     atap_oldpiotiming;      /* 51: old PIO timing mode */
    uint8_t     __junk3;
    uint8_t     atap_olddmatiming;      /* 52: old DMA timing mode (ATA) */
#else
    uint8_t     atap_oldpiotiming;      /* 51: old PIO timing mode */
    uint8_t     __junk2;
    uint8_t     atap_olddmatiming;      /* 52: old DMA timing mode (ATA) */
    uint8_t     __junk3;
#endif
    uint16_t    atap_extensions;        /* 53: extensions supported */
#define WDC_EXT_UDMA_MODES      0x0004
#define WDC_EXT_MODES           0x0002
#define WDC_EXT_GEOM            0x0001
/* words 54-62 are ATA only */
    uint16_t    atap_curcylinders;      /* 54: current logical cylinders */
    uint16_t    atap_curheads;          /* 55: current logical heads */
    uint16_t    atap_cursectors;        /* 56: current logical sectors/tracks */
    uint16_t    atap_curcapacity[2];    /* 57-58: current capacity */
    uint8_t     atap_curmulti;          /* 59: current multi-sector setting */
    uint8_t     atap_curmulti_valid;    /* 59: current multi-sector setting */
#define WDC_MULTI_VALID 0x0100
#define WDC_MULTI_MASK  0x00ff
    uint32_t    atap_capacity;  /* 60-61: total capacity (LBA only) */
    uint16_t    __retired4;
#if ATA_BYTE_ORDER == LITTLE_ENDIAN
    uint8_t     atap_dmamode_supp;      /* 63: multiword DMA mode supported */
    uint8_t     atap_dmamode_act;       /*     multiword DMA mode active */
    uint8_t     atap_piomode_supp;      /* 64: PIO mode supported */
    uint8_t     __junk4;
#else
    uint8_t     atap_dmamode_act;       /*     multiword DMA mode active */
    uint8_t     atap_dmamode_supp;      /* 63: multiword DMA mode supported */
    uint8_t     __junk4;
    uint8_t     atap_piomode_supp;      /* 64: PIO mode supported */
#endif
    uint16_t    atap_dmatiming_mimi;    /* 65: minimum DMA cycle time */
    uint16_t    atap_dmatiming_recom;   /* 66: recommended DMA cycle time */
    uint16_t    atap_piotiming;         /* 67: mini PIO cycle time without FC */
    uint16_t    atap_piotiming_iordy;   /* 68: mini PIO cycle time with IORDY FC */
    uint16_t    __reserved3[2];
/* words 71-72 are ATAPI only */
    uint16_t    atap_pkt_br;            /* 71: time (ns) to bus release */
    uint16_t    atap_pkt_bsyclr;        /* 72: tme to clear BSY after service */
    uint16_t    __reserved4[2];
    uint16_t    atap_queuedepth;        /* 75: */
#define WDC_QUEUE_DEPTH_MASK 0x1f
    uint16_t    atap_sata_caps;         /* 76: SATA capabilities */
#define SATA_SIGNAL_GEN1        0x0002  /* SATA Gen-1 signaling speed */
#define SATA_SIGNAL_GEN2        0x0004  /* SATA Gen-2 signaling speed */
#define SATA_NATIVE_CMDQ        0x0100  /* native command queuing */
#define SATA_HOST_PWR_MGMT      0x0200  /* power management (host) */
    uint16_t    atap_sata_reserved;     /* 77: reserved */
    uint16_t    atap_sata_features_supp;/* 78: SATA features supported */
#define SATA_NONZERO_OFFSETS    0x0002  /* non-zero buffer offsets */
#define SATA_DMA_SETUP_AUTO     0x0004  /* DMA setup auto-activate */
#define SATA_DRIVE_PWR_MGMT     0x0008  /* power management (device) */
    uint16_t    atap_sata_features_en;  /* 79: SATA features enabled */
    uint16_t    atap_ata_major;         /* 80: Major version number */
#define WDC_VER_ATA1    0x0002
#define WDC_VER_ATA2    0x0004
#define WDC_VER_ATA3    0x0008
#define WDC_VER_ATA4    0x0010
#define WDC_VER_ATA5    0x0020
#define WDC_VER_ATA6    0x0040
#define WDC_VER_ATA7    0x0080
#define WDC_VER_ATA8    0x0100
#define WDC_VER_ATA9    0x0200
#define WDC_VER_ATA10   0x0400
#define WDC_VER_ATA11   0x0800
#define WDC_VER_ATA12   0x1000
#define WDC_VER_ATA13   0x2000
#define WDC_VER_ATA14   0x4000
    uint16_t    atap_ata_minor;         /* 81: Minor version number */
    uint16_t    atap_cmd_set1;          /* 82: command set supported */
#define WDC_CMD1_NOP    0x4000
#define WDC_CMD1_RB     0x2000
#define WDC_CMD1_WB     0x1000
#define WDC_CMD1_HPA    0x0400
#define WDC_CMD1_DVRST  0x0200
#define WDC_CMD1_SRV    0x0100
#define WDC_CMD1_RLSE   0x0080
#define WDC_CMD1_AHEAD  0x0040
#define WDC_CMD1_CACHE  0x0020
#define WDC_CMD1_PKT    0x0010
#define WDC_CMD1_PM     0x0008
#define WDC_CMD1_REMOV  0x0004
#define WDC_CMD1_SEC    0x0002
#define WDC_CMD1_SMART  0x0001
    uint16_t    atap_cmd_set2;          /* 83: command set supported */
#define ATAPI_CMD2_FCE  0x2000 /* Flush Cache Ext supported */
#define ATAPI_CMD2_FC   0x1000 /* Flush Cache supported */
#define ATAPI_CMD2_DCO  0x0800 /* Device Configuration Overlay supported */
#define ATAPI_CMD2_48AD 0x0400 /* 48bit address supported */
#define ATAPI_CMD2_AAM  0x0200 /* Automatic Acoustic Management supported */
#define ATAPI_CMD2_SM   0x0100 /* Set Max security extension supported */
#define ATAPI_CMD2_SF   0x0040 /* Set Features subcommand required */
#define ATAPI_CMD2_PUIS 0x0020 /* Power up in standby supported */
#define WDC_CMD2_RMSN   0x0010
#define ATA_CMD2_APM    0x0008
#define ATA_CMD2_CFA    0x0004
#define ATA_CMD2_RWQ    0x0002
#define WDC_CMD2_DM     0x0001 /* Download Microcode supported */
    uint16_t    atap_cmd_ext;           /* 84: command/features supp. ext. */
#define ATAPI_CMDE_MSER 0x0004 /* Media serial number supported */
#define ATAPI_CMDE_TEST 0x0002 /* SMART self-test supported */
#define ATAPI_CMDE_SLOG 0x0001 /* SMART error logging supported */
    uint16_t    atap_cmd1_en;           /* 85: cmd/features enabled */
/* bits are the same as atap_cmd_set1 */
    uint16_t    atap_cmd2_en;           /* 86: cmd/features enabled */
/* bits are the same as atap_cmd_set2 */
    uint16_t    atap_cmd_def;           /* 87: cmd/features default */
/* bits are NOT the same as atap_cmd_ext */
#if ATA_BYTE_ORDER == LITTLE_ENDIAN
    uint8_t     atap_udmamode_supp;     /* 88: Ultra-DMA mode supported */
    uint8_t     atap_udmamode_act;      /*     Ultra-DMA mode active */
#else
    uint8_t     atap_udmamode_act;      /*     Ultra-DMA mode active */
    uint8_t     atap_udmamode_supp;     /* 88: Ultra-DMA mode supported */
#endif
/* 89-92 are ATA-only */
    uint16_t    atap_seu_time;          /* 89: Sec. Erase Unit compl. time */
    uint16_t    atap_eseu_time;         /* 90: Enhanced SEU compl. time */
    uint16_t    atap_apm_val;           /* 91: current APM value */
    uint16_t    atap_mpasswd_rev;       /* 92: Master Password revision */
    uint16_t    atap_hwreset_res;       /* 93: Hardware reset value */
#define ATA_HWRES_CBLID    0x2000  /* CBLID above Vih */
#define ATA_HWRES_D1_PDIAG 0x0800  /* Device 1 PDIAG detect OK */
#define ATA_HWRES_D1_CSEL  0x0400  /* Device 1 used CSEL for address */
#define ATA_HWRES_D1_JUMP  0x0200  /* Device 1 jumpered to address */
#define ATA_HWRES_D0_SEL   0x0040  /* Device 0 responds when Dev 1 selected */
#define ATA_HWRES_D0_DASP  0x0020  /* Device 0 DASP detect OK */
#define ATA_HWRES_D0_PDIAG 0x0010  /* Device 0 PDIAG detect OK */
#define ATA_HWRES_D0_DIAG  0x0008  /* Device 0 diag OK */
#define ATA_HWRES_D0_CSEL  0x0004  /* Device 0 used CSEL for address */
#define ATA_HWRES_D0_JUMP  0x0002  /* Device 0 jumpered to address */
#if ATA_BYTE_ORDER == LITTLE_ENDIAN
    uint8_t     atap_acoustic_val;      /* 94: Current acoustic level */
    uint8_t     atap_acoustic_def;      /*     recommended level */
#else
    uint8_t     atap_acoustic_def;      /*     recommended level */
    uint8_t     atap_acoustic_val;      /* 94: Current acoustic level */
#endif
    uint16_t    __reserved6[5];         /* 95-99: reserved */
    uint16_t    atap_max_lba[4];        /* 100-103: Max. user LBA add */
    uint16_t    __reserved7[23];        /* 104-126: reserved */
    uint16_t    atap_rmsn_supp;         /* 127: remov. media status notif. */
#define WDC_RMSN_SUPP_MASK 0x0003
#define WDC_RMSN_SUPP 0x0001
    uint16_t    atap_sec_st;            /* 128: security status */
#define WDC_SEC_LEV_MAX 0x0100
#define WDC_SEC_ESE_SUPP 0x0020
#define WDC_SEC_EXP     0x0010
#define WDC_SEC_FROZEN  0x0008
#define WDC_SEC_LOCKED  0x0004
#define WDC_SEC_EN      0x0002
#define WDC_SEC_SUPP    0x0001
    uint16_t    __reserved8[31];        /* 129-159: vendor specific */
    uint16_t    atap_cfa_power;         /* 160: CFA powermode */
#define ATAPI_CFA_MAX_MASK  0x0FFF
#define ATAPI_CFA_MODE1_DIS 0x1000 /* CFA Mode 1 Disabled */
#define ATAPI_CFA_MODE1_REQ 0x2000 /* CFA Mode 1 Required */
#define ATAPI_CFA_WORD160   0x8000 /* Word 160 supported */
    uint16_t    __reserved9[15];        /* 161-175: reserved for CFA */
    uint8_t     atap_media_serial[60];  /* 176-205: media serial number */
    uint16_t    __reserved10[49];       /* 206-254: reserved */
#if ATA_BYTE_ORDER == LITTLE_ENDIAN
    uint8_t     atap_signature;         /* 255: Signature */
    uint8_t     atap_checksum;          /*      Checksum */
#else
    uint8_t     atap_checksum;          /*      Checksum */
    uint8_t     atap_signature;         /* 255: Signature */
#endif
};
 
#undef ATA_BYTE_ORDER
#endif  /* !_DEV_ATA_ATAREG_H_ */