#include <gic.hh>

Inheritance diagram for gem5::fastmodel::GIC:

Public Member Functions
	GIC (const FastModelGICParams &params)

Port &	getPort (const std::string &if_name, PortID idx=InvalidPortID) override
	Get a port with a given name and index. More...

void	sendInt (uint32_t num) override
	Post an interrupt from a device that is connected to the GIC. More...

void	clearInt (uint32_t num) override
	Clear an interrupt from a device that is connected to the GIC. More...

void	sendPPInt (uint32_t num, uint32_t cpu) override
	Interface call for private peripheral interrupts. More...

void	clearPPInt (uint32_t num, uint32_t cpu) override

bool	supportsVersion (GicVersion version) override
	Check if version supported. More...

AddrRangeList	getAddrRanges () const override
	Every PIO device is obliged to provide an implementation that returns the address ranges the device responds to. More...

Tick	read (PacketPtr pkt) override
	Pure virtual function that the device must implement. More...

Tick	write (PacketPtr pkt) override
	Pure virtual function that the device must implement. More...

Public Member Functions inherited from gem5::BaseGic
	BaseGic (const Params &p)

virtual	~BaseGic ()

void	init () override
	init() is called after all C++ SimObjects have been created and all ports are connected. More...

const Params &	params () const

ArmSystem *	getSystem () const

Public Member Functions inherited from gem5::PioDevice
	PioDevice (const Params &p)

virtual	~PioDevice ()

void	init () override
	init() is called after all C++ SimObjects have been created and all ports are connected. More...

Port &	getPort (const std::string &if_name, PortID idx=InvalidPortID) override
	Get a port with a given name and index. More...

Public Member Functions inherited from gem5::ClockedObject
	ClockedObject (const ClockedObjectParams &p)

void	serialize (CheckpointOut &cp) const override
	Serialize an object. More...

void	unserialize (CheckpointIn &cp) override
	Unserialize an object. More...

Public Member Functions inherited from gem5::SimObject
const Params &	params () const

	SimObject (const Params &p)

virtual	~SimObject ()

virtual void	loadState (CheckpointIn &cp)
	loadState() is called on each SimObject when restoring from a checkpoint. More...

virtual void	initState ()
	initState() is called on each SimObject when not restoring from a checkpoint. More...

virtual void	regProbePoints ()
	Register probe points for this object. More...

virtual void	regProbeListeners ()
	Register probe listeners for this object. More...

ProbeManager *	getProbeManager ()
	Get the probe manager for this object. More...

virtual void	startup ()
	startup() is the final initialization call before simulation. More...

DrainState	drain () override
	Provide a default implementation of the drain interface for objects that don't need draining. More...

virtual void	memWriteback ()
	Write back dirty buffers to memory using functional writes. More...

virtual void	memInvalidate ()
	Invalidate the contents of memory buffers. More...

void	serialize (CheckpointOut &cp) const override
	Serialize an object. More...

void	unserialize (CheckpointIn &cp) override
	Unserialize an object. More...

Public Member Functions inherited from gem5::EventManager
EventQueue *	eventQueue () const

void	schedule (Event &event, Tick when)

void	deschedule (Event &event)

void	reschedule (Event &event, Tick when, bool always=false)

void	schedule (Event *event, Tick when)

void	deschedule (Event *event)

void	reschedule (Event *event, Tick when, bool always=false)

void	wakeupEventQueue (Tick when=(Tick) -1)
	This function is not needed by the usual gem5 event loop but may be necessary in derived EventQueues which host gem5 on other schedulers. More...

void	setCurTick (Tick newVal)

	EventManager (EventManager &em)
	Event manger manages events in the event queue. More...

	EventManager (EventManager *em)

	EventManager (EventQueue *eq)

Public Member Functions inherited from gem5::Serializable
	Serializable ()

virtual	~Serializable ()

void	serializeSection (CheckpointOut &cp, const char *name) const
	Serialize an object into a new section. More...

void	serializeSection (CheckpointOut &cp, const std::string &name) const

void	unserializeSection (CheckpointIn &cp, const char *name)
	Unserialize an a child object. More...

void	unserializeSection (CheckpointIn &cp, const std::string &name)

Public Member Functions inherited from gem5::Drainable
DrainState	drainState () const
	Return the current drain state of an object. More...

virtual void	notifyFork ()
	Notify a child process of a fork. More...

Public Member Functions inherited from gem5::statistics::Group
	Group (Group parent, const char name=nullptr)
	Construct a new statistics group. More...

virtual	~Group ()

virtual void	regStats ()
	Callback to set stat parameters. More...

virtual void	resetStats ()
	Callback to reset stats. More...

virtual void	preDumpStats ()
	Callback before stats are dumped. More...

void	addStat (statistics::Info *info)
	Register a stat with this group. More...

const std::map< std::string, Group * > &	getStatGroups () const
	Get all child groups associated with this object. More...

const std::vector< Info * > &	getStats () const
	Get all stats associated with this object. More...

void	addStatGroup (const char name, Group block)
	Add a stat block as a child of this block. More...

const Info *	resolveStat (std::string name) const
	Resolve a stat by its name within this group. More...

void	mergeStatGroup (Group *block)
	Merge the contents (stats & children) of a block to this block. More...

	Group ()=delete

	Group (const Group &)=delete

Group &	operator= (const Group &)=delete

Public Member Functions inherited from gem5::Named
	Named (const std::string &name_)

virtual	~Named ()=default

virtual std::string	name () const

Public Member Functions inherited from gem5::Clocked
void	updateClockPeriod ()
	Update the tick to the current tick. More...

Tick	clockEdge (Cycles cycles=Cycles(0)) const
	Determine the tick when a cycle begins, by default the current one, but the argument also enables the caller to determine a future cycle. More...

Cycles	curCycle () const
	Determine the current cycle, corresponding to a tick aligned to a clock edge. More...

Tick	nextCycle () const
	Based on the clock of the object, determine the start tick of the first cycle that is at least one cycle in the future. More...

uint64_t	frequency () const

Tick	clockPeriod () const

double	voltage () const

Cycles	ticksToCycles (Tick t) const

Tick	cyclesToTicks (Cycles c) const

Private Types
typedef sc_gem5::TlmInitiatorBaseWrapper< 64, svp_gicv3_comms::gicv3_comms_fw_if, svp_gicv3_comms::gicv3_comms_bw_if, 1, sc_core::SC_ONE_OR_MORE_BOUND >	TlmGicInitiator

Private Attributes
AmbaInitiator	ambaM

AmbaTarget	ambaS

std::vector< std::unique_ptr< TlmGicInitiator > >	redistributors

SCGIC *	scGIC

Additional Inherited Members
Public Types inherited from gem5::BaseGic
enum	GicVersion { GicVersion::GIC_V2, GicVersion::GIC_V3, GicVersion::GIC_V4 }

typedef BaseGicParams	Params

Public Types inherited from gem5::PioDevice
using	Params = PioDeviceParams

Public Types inherited from gem5::ClockedObject
using	Params = ClockedObjectParams
	Parameters of ClockedObject. More...

Public Types inherited from gem5::SimObject
typedef SimObjectParams	Params

Static Public Member Functions inherited from gem5::SimObject
static void	serializeAll (const std::string &cpt_dir)
	Create a checkpoint by serializing all SimObjects in the system. More...

static SimObject *	find (const char *name)
	Find the SimObject with the given name and return a pointer to it. More...

static void	setSimObjectResolver (SimObjectResolver *resolver)
	There is a single object name resolver, and it is only set when simulation is restoring from checkpoints. More...

static SimObjectResolver *	getSimObjectResolver ()
	There is a single object name resolver, and it is only set when simulation is restoring from checkpoints. More...

Static Public Member Functions inherited from gem5::Serializable
static const std::string &	currentSection ()
	Gets the fully-qualified name of the active section. More...

static void	generateCheckpointOut (const std::string &cpt_dir, std::ofstream &outstream)
	Generate a checkpoint file so that the serialization can be routed to it. More...

Public Attributes inherited from gem5::ClockedObject
PowerState *	powerState

Protected Member Functions inherited from gem5::Drainable
	Drainable ()

virtual	~Drainable ()

virtual void	drainResume ()
	Resume execution after a successful drain. More...

void	signalDrainDone () const
	Signal that an object is drained. More...

Protected Member Functions inherited from gem5::Clocked
	Clocked (ClockDomain &clk_domain)
	Create a clocked object and set the clock domain based on the parameters. More...

	Clocked (Clocked &)=delete

Clocked &	operator= (Clocked &)=delete

virtual	~Clocked ()
	Virtual destructor due to inheritance. More...

void	resetClock () const
	Reset the object's clock using the current global tick value. More...

virtual void	clockPeriodUpdated ()
	A hook subclasses can implement so they can do any extra work that's needed when the clock rate is changed. More...

Protected Attributes inherited from gem5::BaseGic
Platform *	platform
	Platform this GIC belongs to. More...

Protected Attributes inherited from gem5::PioDevice
System *	sys

PioPort< PioDevice >	pioPort
	The pioPort that handles the requests for us and provides us requests that it sees. More...

Protected Attributes inherited from gem5::SimObject
const SimObjectParams &	_params
	Cached copy of the object parameters. More...

Protected Attributes inherited from gem5::EventManager
EventQueue *	eventq
	A pointer to this object's event queue. More...

Detailed Description

Definition at line 110 of file gic.hh.

Member Typedef Documentation

◆ TlmGicInitiator

typedef sc_gem5::TlmInitiatorBaseWrapper< 64, svp_gicv3_comms::gicv3_comms_fw_if, svp_gicv3_comms::gicv3_comms_bw_if, 1, sc_core::SC_ONE_OR_MORE_BOUND> gem5::fastmodel::GIC::TlmGicInitiator

private

Definition at line 116 of file gic.hh.

Constructor & Destructor Documentation

◆ GIC()

gem5::fastmodel::GIC::GIC ( const FastModelGICParams & params )

Definition at line 303 of file gic.cc.

Member Function Documentation

◆ clearInt()

void gem5::fastmodel::GIC::clearInt ( uint32_t num )

overridevirtual

Clear an interrupt from a device that is connected to the GIC.

Depending on the configuration, the GIC may de-assert it's CPU line.

Parameters

num	number of interrupt to send

Implements gem5::BaseGic.

Definition at line 338 of file gic.cc.

References scGIC, and gem5::fastmodel::SCGIC::signalInterrupt.

◆ clearPPInt()

void gem5::fastmodel::GIC::clearPPInt	(	uint32_t	num,
		uint32_t	cpu
	)

overridevirtual

Implements gem5::BaseGic.

Definition at line 350 of file gic.cc.

References scGIC, and gem5::fastmodel::SCGIC::signalInterrupt.

◆ getAddrRanges()

AddrRangeList gem5::fastmodel::GIC::getAddrRanges ( ) const

inlineoverridevirtual

Every PIO device is obliged to provide an implementation that returns the address ranges the device responds to.

Returns: a list of non-overlapping address ranges

Implements gem5::PioDevice.

Definition at line 138 of file gic.hh.

◆ getPort()

Port & gem5::fastmodel::GIC::getPort	(	const std::string &	if_name,
		PortID	idx = `InvalidPortID`
	)

overridevirtual

Get a port with a given name and index.

This is used at binding time and returns a reference to a protocol-agnostic port.

gem5 has a request and response port interface. All memory objects are connected together via ports. These ports provide a rigid interface between these memory objects. These ports implement three different memory system modes: timing, atomic, and functional. The most important mode is the timing mode and here timing mode is used for conducting cycle-level timing experiments. The other modes are only used in special circumstances and should not be used to conduct cycle-level timing experiments. The other modes are only used in special circumstances. These ports allow SimObjects to communicate with each other.

Parameters

if_name	Port name
idx	Index in the case of a VectorPort

Returns: A reference to the given port

Reimplemented from gem5::SimObject.

Definition at line 312 of file gic.cc.

References ambaM, ambaS, gem5::csprintf(), gem5::PioDevice::getPort(), gem5::Named::name(), redistributors, and scGIC.

◆ read()

Tick gem5::fastmodel::GIC::read ( PacketPtr pkt )

inlineoverridevirtual

Pure virtual function that the device must implement.

Called when a read command is recieved by the port.

Parameters

pkt	Packet describing this request

Returns: number of ticks it took to complete

Implements gem5::PioDevice.

Definition at line 139 of file gic.hh.

◆ sendInt()

void gem5::fastmodel::GIC::sendInt ( uint32_t num )

overridevirtual

Post an interrupt from a device that is connected to the GIC.

Depending on the configuration, the GIC will pass this interrupt on through to a CPU.

Parameters

num	number of interrupt to send

Implements gem5::BaseGic.

Definition at line 332 of file gic.cc.

References scGIC, and gem5::fastmodel::SCGIC::signalInterrupt.

◆ sendPPInt()

void gem5::fastmodel::GIC::sendPPInt	(	uint32_t	num,
		uint32_t	cpu
	)

overridevirtual

Interface call for private peripheral interrupts.

Parameters

num	number of interrupt to send
cpu	CPU to forward interrupt to

Implements gem5::BaseGic.

Definition at line 344 of file gic.cc.

References scGIC, and gem5::fastmodel::SCGIC::signalInterrupt.

◆ supportsVersion()

bool gem5::fastmodel::GIC::supportsVersion ( GicVersion version )

overridevirtual

Check if version supported.

Implements gem5::BaseGic.

Definition at line 356 of file gic.cc.

References gem5::BaseGic::GIC_V2, gem5::BaseGic::GIC_V3, gem5::BaseGic::GIC_V4, and scGIC.

◆ write()

Tick gem5::fastmodel::GIC::write ( PacketPtr pkt )

inlineoverridevirtual

Pure virtual function that the device must implement.

Called when a write command is recieved by the port.

Parameters

pkt	Packet describing this request

Returns: number of ticks it took to complete

Implements gem5::PioDevice.

Definition at line 140 of file gic.hh.

Member Data Documentation

◆ ambaM

AmbaInitiator gem5::fastmodel::GIC::ambaM

private

Definition at line 118 of file gic.hh.

Referenced by getPort().

◆ ambaS

AmbaTarget gem5::fastmodel::GIC::ambaS

private

Definition at line 119 of file gic.hh.

Referenced by getPort().

◆ redistributors

std::vector<std::unique_ptr<TlmGicInitiator> > gem5::fastmodel::GIC::redistributors

private

Definition at line 120 of file gic.hh.

Referenced by getPort().

◆ scGIC

SCGIC* gem5::fastmodel::GIC::scGIC

private

Definition at line 122 of file gic.hh.

Referenced by clearInt(), clearPPInt(), getPort(), sendInt(), sendPPInt(), and supportsVersion().

The documentation for this class was generated from the following files:

arch/arm/fastmodel/GIC/gic.hh
arch/arm/fastmodel/GIC/gic.cc

Public Member Functions

Private Types

Private Attributes

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ TlmGicInitiator

Constructor & Destructor Documentation

◆ GIC()

Member Function Documentation

◆ clearInt()

◆ clearPPInt()

◆ getAddrRanges()

◆ getPort()

◆ read()

◆ sendInt()

◆ sendPPInt()

◆ supportsVersion()

◆ write()

Member Data Documentation

◆ ambaM

◆ ambaS

◆ redistributors

◆ scGIC