A MasterPort is a specialisation of a BaseMasterPort, which implements the default protocol for the three different level of transport functions. More...

#include <port.hh>

Inheritance diagram for MasterPort:

Public Member Functions
	MasterPort (const std::string &name, SimObject *_owner, PortID id=InvalidPortID)
	Master port. More...

virtual	~MasterPort ()

void	bind (Port &peer) override
	Bind this master port to a slave port. More...

void	unbind () override
	Unbind this master port and the associated slave port. More...

virtual bool	isSnooping () const
	Determine if this master port is snooping or not. More...

AddrRangeList	getAddrRanges () const
	Get the address ranges of the connected slave port. More...

void	printAddr (Addr a)
	Inject a PrintReq for the given address to print the state of that address throughout the memory system. More...

Tick	sendAtomic (PacketPtr pkt)
	Send an atomic request packet, where the data is moved and the state is updated in zero time, without interleaving with other memory accesses. More...

Tick	sendAtomicBackdoor (PacketPtr pkt, MemBackdoorPtr &backdoor)
	Send an atomic request packet like above, but also request a backdoor to the data being accessed. More...

void	sendFunctional (PacketPtr pkt) const
	Send a functional request packet, where the data is instantly updated everywhere in the memory system, without affecting the current state of any block or moving the block. More...

bool	sendTimingReq (PacketPtr pkt)
	Attempt to send a timing request to the slave port by calling its corresponding receive function. More...

bool	tryTiming (PacketPtr pkt) const
	Check if the slave can handle a timing request. More...

bool	sendTimingSnoopResp (PacketPtr pkt)
	Attempt to send a timing snoop response packet to the slave port by calling its corresponding receive function. More...

virtual void	sendRetryResp ()
	Send a retry to the slave port that previously attempted a sendTimingResp to this master port and failed. More...

Public Member Functions inherited from Port
virtual	~Port ()
	Virtual destructor due to inheritance. More...

Port &	getPeer ()
	Return a reference to this port's peer. More...

const std::string	name () const
	Return port name (for DPRINTF). More...

PortID	getId () const
	Get the port id. More...

bool	isConnected () const
	Is this port currently connected to a peer? More...

void	takeOverFrom (Port *old)
	A utility function to make it easier to swap out ports. More...

Protected Member Functions
virtual void	recvRangeChange ()
	Called to receive an address range change from the peer slave port. More...

Tick	recvAtomicSnoop (PacketPtr pkt) override
	Default implementations. More...

void	recvFunctionalSnoop (PacketPtr pkt) override
	Receive a functional snoop request packet from the peer. More...

void	recvTimingSnoopReq (PacketPtr pkt) override
	Receive a timing snoop request from the peer. More...

void	recvRetrySnoopResp () override
	Called by the peer if sendTimingSnoopResp was called on this protocol (causing recvTimingSnoopResp to be called on the peer) and was unsuccessful. More...

Protected Member Functions inherited from Port
	Port (const std::string &_name, PortID _id)
	Abstract base class for ports. More...

Protected Member Functions inherited from AtomicRequestProtocol
Tick	send (AtomicResponseProtocol *peer, PacketPtr pkt)
	Send an atomic request packet, where the data is moved and the state is updated in zero time, without interleaving with other memory accesses. More...

Tick	sendBackdoor (AtomicResponseProtocol *peer, PacketPtr pkt, MemBackdoorPtr &backdoor)
	Send an atomic request packet like above, but also request a backdoor to the data being accessed. More...

Protected Member Functions inherited from TimingRequestProtocol
bool	sendReq (TimingResponseProtocol *peer, PacketPtr pkt)
	Attempt to send a timing request to the peer by calling its corresponding receive function. More...

bool	trySend (TimingResponseProtocol *peer, PacketPtr pkt) const
	Check if the peer can handle a timing request. More...

bool	sendSnoopResp (TimingResponseProtocol *peer, PacketPtr pkt)
	Attempt to send a timing snoop response packet to it's peer by calling its corresponding receive function. More...

void	sendRetryResp (TimingResponseProtocol *peer)
	Send a retry to the peer that previously attempted a sendTimingResp to this protocol and failed. More...

virtual bool	recvTimingResp (PacketPtr pkt)=0
	Receive a timing response from the peer. More...

virtual void	recvReqRetry ()=0
	Called by the peer if sendTimingReq was called on this peer (causing recvTimingReq to be called on the peer) and was unsuccessful. More...

Protected Member Functions inherited from FunctionalRequestProtocol
void	send (FunctionalResponseProtocol *peer, PacketPtr pkt) const
	Send a functional request packet, where the data is instantly updated everywhere in the memory system, without affecting the current state of any block or moving the block. More...

Protected Attributes
SimObject &	owner

Protected Attributes inherited from Port
const PortID	id
	A numeric identifier to distinguish ports in a vector, and set to InvalidPortID in case this port is not part of a vector. More...

Port *	_peer
	A pointer to this port's peer. More...

bool	_connected
	Whether this port is currently connected to a peer port. More...

Private Attributes
SlavePort *	_slavePort

Friends
class	SlavePort

Detailed Description

A MasterPort is a specialisation of a BaseMasterPort, which implements the default protocol for the three different level of transport functions.

In addition to the basic functionality of sending packets, it also has functions to receive range changes or determine if the port is snooping or not.

The three protocols are atomic, timing, and functional, each with its own header file.

Definition at line 75 of file port.hh.

Constructor & Destructor Documentation

◆ MasterPort()

MasterPort::MasterPort	(	const std::string &	name,
		SimObject *	_owner,
		PortID	id = `InvalidPortID`
	)

Master port.

Definition at line 57 of file port.cc.

◆ ~MasterPort()

MasterPort::~MasterPort ( )

virtual

Definition at line 62 of file port.cc.

Member Function Documentation

◆ bind()

void MasterPort::bind ( Port & peer )

overridevirtual

Bind this master port to a slave port.

This also does the mirror action and binds the slave port to the master port.

Reimplemented from Port.

Definition at line 67 of file port.cc.

References _slavePort, Port::bind(), fatal, and Port::name().

◆ getAddrRanges()

AddrRangeList MasterPort::getAddrRanges ( ) const

Get the address ranges of the connected slave port.

Definition at line 93 of file port.cc.

References _slavePort, and SlavePort::getAddrRanges().

Referenced by MemDelay::SlavePort::getAddrRanges(), SimpleMemobj::getAddrRanges(), MemCheckerMonitor::getAddrRanges(), SimpleCache::getAddrRanges(), CommMonitor::getAddrRanges(), isSnooping(), RubyPort::PioSlavePort::recvFunctional(), and SlavePort::sendRangeChange().

◆ isSnooping()

virtual bool MasterPort::isSnooping ( ) const

inlinevirtual

Determine if this master port is snooping or not.

The default implementation returns false and thus tells the neighbour we are not snooping. Any master port that wants to receive snoop requests (e.g. a cache connected to a bus) has to override this function.

Returns: true if the port should be considered a snooper

Reimplemented in TraceCPU::DcachePort, TimingSimpleCPU::DcachePort, CoherentXBar::CoherentXBarMasterPort, LSQ< Impl >::DcachePort, CommMonitor::MonitorMasterPort, BaseCache::CacheMasterPort, AtomicSimpleCPU::AtomicCPUDPort, AddrMapper::MapperMasterPort, MemCheckerMonitor::MonitorMasterPort, Minor::LSQ::DcachePort, and MemDelay::MasterPort.

Definition at line 111 of file port.hh.

References ArmISA::a, getAddrRanges(), printAddr(), sendAtomic(), sendAtomicBackdoor(), sendFunctional(), sendRetryResp(), sendTimingReq(), sendTimingSnoopResp(), and tryTiming().

Referenced by SlavePort::isSnooping().

◆ printAddr()

void MasterPort::printAddr ( Addr a )

Inject a PrintReq for the given address to print the state of that address throughout the memory system.

For debugging.

Definition at line 99 of file port.cc.

References ArmISA::a, Request::funcMasterId, MemCmd::PrintReq, and sendFunctional().

Referenced by AtomicSimpleCPU::getInstPort(), isSnooping(), GarnetSyntheticTraffic::printAddr(), AtomicSimpleCPU::printAddr(), and TimingSimpleCPU::printAddr().

◆ recvAtomicSnoop()

Tick MasterPort::recvAtomicSnoop ( PacketPtr pkt )

inlineoverrideprotectedvirtual

Default implementations.

Implements AtomicRequestProtocol.

Definition at line 224 of file port.hh.

References Port::name(), and panic.

Referenced by BaseCache::allocOnFill().

◆ recvFunctionalSnoop()

void MasterPort::recvFunctionalSnoop ( PacketPtr pkt )

inlineoverrideprotectedvirtual

Receive a functional snoop request packet from the peer.

Implements FunctionalRequestProtocol.

Definition at line 231 of file port.hh.

References Port::name(), and panic.

◆ recvRangeChange()

virtual void MasterPort::recvRangeChange ( )

inlineprotectedvirtual

Called to receive an address range change from the peer slave port.

The default implementation ignores the change and does nothing. Override this function in a derived class if the owner needs to be aware of the address ranges, e.g. in an interconnect component like a bus.

Reimplemented in ComputeUnit::LDSPort, ComputeUnit::ITLBPort, ComputeUnit::DTLBPort, ComputeUnit::SQCPort, ComputeUnit::DataPort, X86ISA::GpuTLB::MemSidePort, CoherentXBar::CoherentXBarMasterPort, TLBCoalescer::MemSidePort, SimpleCache::MemSidePort, SimpleMemobj::MemSidePort, NoncoherentXBar::NoncoherentXBarMasterPort, CommMonitor::MonitorMasterPort, GpuDispatcher::TLBPort, AddrMapper::MapperMasterPort, MemCheckerMonitor::MonitorMasterPort, RubyPort::PioMasterPort, sc_gem5::TlmToGem5Bridge< BITWIDTH >::BridgeMasterPort, MemDelay::MasterPort, and RubyPort::MemMasterPort.

Definition at line 218 of file port.hh.

Referenced by SlavePort::sendRangeChange().

◆ recvRetrySnoopResp()

void MasterPort::recvRetrySnoopResp ( )

inlineoverrideprotectedvirtual

Called by the peer if sendTimingSnoopResp was called on this protocol (causing recvTimingSnoopResp to be called on the peer) and was unsuccessful.

Implements TimingRequestProtocol.

Reimplemented in QueuedMasterPort.

Definition at line 243 of file port.hh.

References Port::name(), and panic.

◆ recvTimingSnoopReq()

void MasterPort::recvTimingSnoopReq ( PacketPtr pkt )

inlineoverrideprotectedvirtual

Receive a timing snoop request from the peer.

Implements TimingRequestProtocol.

Definition at line 237 of file port.hh.

References Port::name(), and panic.

Referenced by BaseCache::allocOnFill().

◆ sendAtomic()

Tick MasterPort::sendAtomic ( PacketPtr pkt )

inline

Send an atomic request packet, where the data is moved and the state is updated in zero time, without interleaving with other memory accesses.

Parameters

pkt	Packet to send.

Returns: Estimated latency of access.

Definition at line 427 of file port.hh.

References _slavePort, and AtomicRequestProtocol::send().

Referenced by NoncoherentCache::doWritebacksAtomic(), Cache::doWritebacksAtomic(), NoncoherentCache::handleAtomicReqMiss(), Cache::handleAtomicReqMiss(), isSnooping(), ArmISA::Stage2MMU::readDataUntimed(), RubyPort::MemSlavePort::recvAtomic(), MemDelay::SlavePort::recvAtomic(), Cache::recvAtomic(), AbstractController::recvAtomic(), SerialLink::SerialLinkSlavePort::recvAtomic(), Bridge::BridgeSlavePort::recvAtomic(), AddrMapper::recvAtomic(), CommMonitor::recvAtomic(), BaseCache::CpuSidePort::recvAtomic(), SMMUv3::runProcessAtomic(), Gicv3Its::runProcessAtomic(), NonCachingSimpleCPU::sendPacket(), and AtomicSimpleCPU::sendPacket().

◆ sendAtomicBackdoor()

Tick MasterPort::sendAtomicBackdoor	(	PacketPtr	pkt,
		MemBackdoorPtr &	backdoor
	)

inline

Send an atomic request packet like above, but also request a backdoor to the data being accessed.

Parameters

pkt	Packet to send.
backdoor	Can be set to a back door pointer by the target to let caller have direct access to the requested data.

Returns: Estimated latency of access.

Definition at line 433 of file port.hh.

References _slavePort, and AtomicRequestProtocol::sendBackdoor().

Referenced by isSnooping().

◆ sendFunctional()

void MasterPort::sendFunctional ( PacketPtr pkt ) const

inline

Send a functional request packet, where the data is instantly updated everywhere in the memory system, without affecting the current state of any block or moving the block.

Parameters

pkt	Packet to send.

Definition at line 439 of file port.hh.

References _slavePort, and FunctionalRequestProtocol::send().

Referenced by FetchUnit::fetch(), ArmISA::TableWalker::fetchDescriptor(), BaseCache::functionalAccess(), AbstractController::functionalMemoryRead(), AbstractController::functionalMemoryWrite(), Shader::functionalTLBAccess(), SimpleMemobj::handleFunctional(), SimpleCache::handleFunctional(), FetchUnit::initiateFetch(), isSnooping(), PortProxy::PortProxy(), printAddr(), AbstractController::queueMemoryRead(), AbstractController::queueMemoryWrite(), ArmISA::Stage2MMU::readDataUntimed(), CheckerCPU::readMem(), MemDelay::SlavePort::recvFunctional(), SerialLink::SerialLinkSlavePort::recvFunctional(), MemCheckerMonitor::recvFunctional(), AddrMapper::recvFunctional(), Bridge::BridgeSlavePort::recvFunctional(), CommMonitor::recvFunctional(), BaseCache::CpuSidePort::recvFunctional(), MemTest::tick(), and BaseCache::writebackVisitor().

◆ sendRetryResp()

void MasterPort::sendRetryResp ( )

inlinevirtual

Send a retry to the slave port that previously attempted a sendTimingResp to this master port and failed.

Note that this is virtual so that the "fake" snoop response port in the coherent crossbar can override the behaviour.

Reimplemented in CoherentXBar::SnoopRespPort.

Definition at line 463 of file port.hh.

References _slavePort, and TimingRequestProtocol::sendRetryResp().

Referenced by isSnooping(), MemCheckerMonitor::recvRespRetry(), AddrMapper::recvRespRetry(), CommMonitor::recvRespRetry(), and BaseXBar::RespLayer::sendRetry().

◆ sendTimingReq()

bool MasterPort::sendTimingReq ( PacketPtr pkt )

inline

Attempt to send a timing request to the slave port by calling its corresponding receive function.

If the send does not succeed, as indicated by the return value, then the sender must wait for a recvReqRetry at which point it can re-issue a sendTimingReq.

Parameters

pkt	Packet to send.

Returns: If the send was succesful or not.

Definition at line 445 of file port.hh.

References _slavePort, and TimingRequestProtocol::sendReq().

Referenced by GarnetSyntheticTraffic::doRetry(), FetchUnit::fetch(), DefaultFetch< Impl >::finishTranslation(), TimingSimpleCPU::handleReadPacket(), TimingSimpleCPU::handleWritePacket(), SeriesRequestGenerator::initiate(), InvalidateGenerator::initiate(), Check::initiateAction(), Check::initiateCheck(), FetchUnit::initiateFetch(), Check::initiateFlush(), Check::initiatePrefetch(), isSnooping(), SMMUv3::masterRecvReqRetry(), SMMUv3::masterTableWalkRecvReqRetry(), Gicv3Its::recvReqRetry(), DefaultFetch< Impl >::recvReqRetry(), ComputeUnit::LDSPort::recvReqRetry(), MemTest::recvRetry(), Cache::recvTimingReq(), MemCheckerMonitor::recvTimingReq(), AddrMapper::recvTimingReq(), CommMonitor::recvTimingReq(), BaseCache::CpuSidePort::recvTimingReq(), BaseTrafficGen::retryReq(), SMMUv3::runProcessTiming(), Gicv3Its::runProcessTiming(), TraceCPU::FixedRetryGen::send(), TimingSimpleCPU::sendFetch(), BaseCache::sendMSHRQueuePacket(), X86ISA::Walker::sendTiming(), ReqPacketQueue::sendTiming(), ComputeUnit::LDSPort::sendTimingReq(), BaseCache::sendWriteQueuePacket(), TraceCPU::FixedRetryGen::tryNext(), LSQUnit< Impl >::trySendPacket(), Minor::Fetch1::tryToSend(), Minor::LSQ::tryToSend(), and BaseTrafficGen::update().

◆ sendTimingSnoopResp()

bool MasterPort::sendTimingSnoopResp ( PacketPtr pkt )

inline

Attempt to send a timing snoop response packet to the slave port by calling its corresponding receive function.

If the send does not succeed, as indicated by the return value, then the sender must wait for a recvRetrySnoop at which point it can re-issue a sendTimingSnoopResp.

Parameters

pkt	Packet to send.

Definition at line 457 of file port.hh.

References _slavePort, and TimingRequestProtocol::sendSnoopResp().

Referenced by isSnooping(), MemCheckerMonitor::recvTimingSnoopResp(), AddrMapper::recvTimingSnoopResp(), CommMonitor::recvTimingSnoopResp(), and SnoopRespPacketQueue::sendTiming().

◆ tryTiming()

bool MasterPort::tryTiming ( PacketPtr pkt ) const

inline

Check if the slave can handle a timing request.

If the send cannot be handled at the moment, as indicated by the return value, then the sender will receive a recvReqRetry at which point it can re-issue a sendTimingReq.

Parameters

pkt	Packet to send.

Returns: If the send was succesful or not.

Definition at line 451 of file port.hh.

References _slavePort, and TimingRequestProtocol::trySend().

Referenced by isSnooping(), and CommMonitor::tryTiming().

◆ unbind()

void MasterPort::unbind ( )

overridevirtual

Unbind this master port and the associated slave port.

Reimplemented from Port.

Definition at line 82 of file port.cc.

References _slavePort, Port::name(), panic, SlavePort::slaveUnbind(), and Port::unbind().

Friends And Related Function Documentation

◆ SlavePort

friend class SlavePort

friend

Definition at line 78 of file port.hh.

Member Data Documentation

◆ _slavePort

SlavePort* MasterPort::_slavePort

private

Definition at line 81 of file port.hh.

Referenced by bind(), getAddrRanges(), sendAtomic(), sendAtomicBackdoor(), sendFunctional(), sendRetryResp(), sendTimingReq(), sendTimingSnoopResp(), tryTiming(), and unbind().

◆ owner

SimObject& MasterPort::owner

protected

Definition at line 84 of file port.hh.

The documentation for this class was generated from the following files:

mem/port.hh
mem/port.cc

Public Member Functions

Protected Member Functions

Protected Attributes

Private Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

◆ MasterPort()

◆ ~MasterPort()

Member Function Documentation

◆ bind()

◆ getAddrRanges()

◆ isSnooping()

◆ printAddr()

◆ recvAtomicSnoop()

◆ recvFunctionalSnoop()

◆ recvRangeChange()

◆ recvRetrySnoopResp()

◆ recvTimingSnoopReq()

◆ sendAtomic()

◆ sendAtomicBackdoor()

◆ sendFunctional()

◆ sendRetryResp()

◆ sendTimingReq()

◆ sendTimingSnoopResp()

◆ tryTiming()

◆ unbind()

Friends And Related Function Documentation

◆ SlavePort

Member Data Documentation

◆ _slavePort

◆ owner