gem5 v24.0.0.0
|
#include <rv_ctrl.hh>
Classes | |
class | Device |
Public Types | |
enum | DeviceFunc { FUNC_OSC = 1 , FUNC_VOLT = 2 , FUNC_AMP = 3 , FUNC_TEMP = 4 , FUNC_RESET = 5 , FUNC_SCC = 6 , FUNC_MUXFPGA = 7 , FUNC_SHUTDOWN = 8 , FUNC_REBOOT = 9 , FUNC_DVIMODE = 11 , FUNC_POWER = 12 , FUNC_ENERGY = 13 } |
Public Types inherited from gem5::PioDevice | |
using | Params = PioDeviceParams |
Public Types inherited from gem5::ClockedObject | |
using | Params = ClockedObjectParams |
Parameters of ClockedObject. | |
Public Types inherited from gem5::SimObject | |
typedef SimObjectParams | Params |
Public Member Functions | |
PARAMS (RealViewCtrl) | |
RealViewCtrl (const Params &p) | |
The constructor for RealView just registers itself with the MMU. | |
Tick | read (PacketPtr pkt) override |
Handle a read to the device. | |
Tick | write (PacketPtr pkt) override |
All writes are simply ignored. | |
void | serialize (CheckpointOut &cp) const override |
Serialize an object. | |
void | unserialize (CheckpointIn &cp) override |
Unserialize an object. | |
void | registerDevice (DeviceFunc func, uint8_t site, uint8_t pos, uint8_t dcc, uint16_t dev, Device *handler) |
Public Member Functions inherited from gem5::BasicPioDevice | |
PARAMS (BasicPioDevice) | |
BasicPioDevice (const Params &p, Addr size) | |
AddrRangeList | getAddrRanges () const override |
Determine the address ranges that this device responds to. | |
Public Member Functions inherited from gem5::PioDevice | |
PioDevice (const Params &p) | |
virtual | ~PioDevice () |
void | init () override |
init() is called after all C++ SimObjects have been created and all ports are connected. | |
Port & | getPort (const std::string &if_name, PortID idx=InvalidPortID) override |
Get a port with a given name and index. | |
Public Member Functions inherited from gem5::ClockedObject | |
ClockedObject (const ClockedObjectParams &p) | |
Public Member Functions inherited from gem5::SimObject | |
const Params & | params () const |
SimObject (const Params &p) | |
virtual | ~SimObject () |
virtual void | loadState (CheckpointIn &cp) |
loadState() is called on each SimObject when restoring from a checkpoint. | |
virtual void | initState () |
initState() is called on each SimObject when not restoring from a checkpoint. | |
virtual void | regProbePoints () |
Register probe points for this object. | |
virtual void | regProbeListeners () |
Register probe listeners for this object. | |
ProbeManager * | getProbeManager () |
Get the probe manager for this object. | |
virtual void | startup () |
startup() is the final initialization call before simulation. | |
DrainState | drain () override |
Provide a default implementation of the drain interface for objects that don't need draining. | |
virtual void | memWriteback () |
Write back dirty buffers to memory using functional writes. | |
virtual void | memInvalidate () |
Invalidate the contents of memory buffers. | |
void | serialize (CheckpointOut &cp) const override |
Serialize an object. | |
void | unserialize (CheckpointIn &cp) override |
Unserialize an object. | |
Public Member Functions inherited from gem5::EventManager | |
EventQueue * | eventQueue () const |
void | schedule (Event &event, Tick when) |
void | deschedule (Event &event) |
void | reschedule (Event &event, Tick when, bool always=false) |
void | schedule (Event *event, Tick when) |
void | deschedule (Event *event) |
void | reschedule (Event *event, Tick when, bool always=false) |
void | wakeupEventQueue (Tick when=(Tick) -1) |
This function is not needed by the usual gem5 event loop but may be necessary in derived EventQueues which host gem5 on other schedulers. | |
void | setCurTick (Tick newVal) |
EventManager (EventManager &em) | |
Event manger manages events in the event queue. | |
EventManager (EventManager *em) | |
EventManager (EventQueue *eq) | |
Public Member Functions inherited from gem5::Serializable | |
Serializable () | |
virtual | ~Serializable () |
void | serializeSection (CheckpointOut &cp, const char *name) const |
Serialize an object into a new section. | |
void | serializeSection (CheckpointOut &cp, const std::string &name) const |
void | unserializeSection (CheckpointIn &cp, const char *name) |
Unserialize an a child object. | |
void | unserializeSection (CheckpointIn &cp, const std::string &name) |
Public Member Functions inherited from gem5::Drainable | |
DrainState | drainState () const |
Return the current drain state of an object. | |
virtual void | notifyFork () |
Notify a child process of a fork. | |
Public Member Functions inherited from gem5::statistics::Group | |
Group (Group *parent, const char *name=nullptr) | |
Construct a new statistics group. | |
virtual | ~Group () |
virtual void | regStats () |
Callback to set stat parameters. | |
virtual void | resetStats () |
Callback to reset stats. | |
virtual void | preDumpStats () |
Callback before stats are dumped. | |
void | addStat (statistics::Info *info) |
Register a stat with this group. | |
const std::map< std::string, Group * > & | getStatGroups () const |
Get all child groups associated with this object. | |
const std::vector< Info * > & | getStats () const |
Get all stats associated with this object. | |
void | addStatGroup (const char *name, Group *block) |
Add a stat block as a child of this block. | |
const Info * | resolveStat (std::string name) const |
Resolve a stat by its name within this group. | |
void | mergeStatGroup (Group *block) |
Merge the contents (stats & children) of a block to this block. | |
Group ()=delete | |
Group (const Group &)=delete | |
Group & | operator= (const Group &)=delete |
Public Member Functions inherited from gem5::Named | |
Named (const std::string &name_) | |
virtual | ~Named ()=default |
virtual std::string | name () const |
Public Member Functions inherited from gem5::Clocked | |
void | updateClockPeriod () |
Update the tick to the current tick. | |
Tick | clockEdge (Cycles cycles=Cycles(0)) const |
Determine the tick when a cycle begins, by default the current one, but the argument also enables the caller to determine a future cycle. | |
Cycles | curCycle () const |
Determine the current cycle, corresponding to a tick aligned to a clock edge. | |
Tick | nextCycle () const |
Based on the clock of the object, determine the start tick of the first cycle that is at least one cycle in the future. | |
uint64_t | frequency () const |
Tick | clockPeriod () const |
double | voltage () const |
Cycles | ticksToCycles (Tick t) const |
Tick | cyclesToTicks (Cycles c) const |
Protected Types | |
enum | { IdReg = 0x00 , SwReg = 0x04 , Led = 0x08 , Osc0 = 0x0C , Osc1 = 0x10 , Osc2 = 0x14 , Osc3 = 0x18 , Osc4 = 0x1C , Lock = 0x20 , Clock100 = 0x24 , CfgData1 = 0x28 , CfgData2 = 0x2C , Flags = 0x30 , FlagsClr = 0x34 , NvFlags = 0x38 , NvFlagsClr = 0x3C , ResetCtl = 0x40 , PciCtl = 0x44 , MciCtl = 0x48 , Flash = 0x4C , Clcd = 0x50 , ClcdSer = 0x54 , Bootcs = 0x58 , Clock24 = 0x5C , Misc = 0x60 , IoSel = 0x70 , ProcId0 = 0x84 , ProcId1 = 0x88 , CfgData = 0xA0 , CfgCtrl = 0xA4 , CfgStat = 0xA8 , TestOsc0 = 0xC0 , TestOsc1 = 0xC4 , TestOsc2 = 0xC8 , TestOsc3 = 0xCC , TestOsc4 = 0xD0 } |
Protected Member Functions | |
BitUnion32 (SysLockReg) Bitfield< 15 | |
EndBitUnion (SysLockReg) BitUnion32(CfgCtrlReg) Bitfield< 11 | |
EndBitUnion (CfgCtrlReg) static const uint32_t CFG_CTRL_ADDR_MASK=0x3fffffffUL | |
Protected Member Functions inherited from gem5::Drainable | |
Drainable () | |
virtual | ~Drainable () |
virtual void | drainResume () |
Resume execution after a successful drain. | |
void | signalDrainDone () const |
Signal that an object is drained. | |
Protected Member Functions inherited from gem5::Clocked | |
Clocked (ClockDomain &clk_domain) | |
Create a clocked object and set the clock domain based on the parameters. | |
Clocked (Clocked &)=delete | |
Clocked & | operator= (Clocked &)=delete |
virtual | ~Clocked () |
Virtual destructor due to inheritance. | |
void | resetClock () const |
Reset the object's clock using the current global tick value. | |
virtual void | clockPeriodUpdated () |
A hook subclasses can implement so they can do any extra work that's needed when the clock rate is changed. | |
Protected Attributes | |
lockVal | |
Bitfield< 16 > | locked |
dev | |
Bitfield< 15, 12 > | pos |
Bitfield< 17, 16 > | site |
Bitfield< 25, 20 > | func |
Bitfield< 29, 26 > | dcc |
Bitfield< 30 > | wr |
Bitfield< 31 > | start |
SysLockReg | sysLock |
uint32_t | flags |
This register is used for smp booting. | |
uint32_t | scData |
This register contains the result from a system control reg access. | |
std::map< uint32_t, Device * > | devices |
Protected Attributes inherited from gem5::BasicPioDevice | |
Addr | pioAddr |
Address that the device listens to. | |
Addr | pioSize |
Size that the device's address range. | |
Tick | pioDelay |
Delay that the device experinces on an access. | |
Protected Attributes inherited from gem5::PioDevice | |
System * | sys |
PioPort< PioDevice > | pioPort |
The pioPort that handles the requests for us and provides us requests that it sees. | |
Protected Attributes inherited from gem5::SimObject | |
const SimObjectParams & | _params |
Cached copy of the object parameters. | |
Protected Attributes inherited from gem5::EventManager | |
EventQueue * | eventq |
A pointer to this object's event queue. | |
Additional Inherited Members | |
Static Public Member Functions inherited from gem5::SimObject | |
static void | serializeAll (const std::string &cpt_dir) |
Create a checkpoint by serializing all SimObjects in the system. | |
static SimObject * | find (const char *name) |
Find the SimObject with the given name and return a pointer to it. | |
static void | setSimObjectResolver (SimObjectResolver *resolver) |
There is a single object name resolver, and it is only set when simulation is restoring from checkpoints. | |
static SimObjectResolver * | getSimObjectResolver () |
There is a single object name resolver, and it is only set when simulation is restoring from checkpoints. | |
Static Public Member Functions inherited from gem5::Serializable | |
static const std::string & | currentSection () |
Gets the fully-qualified name of the active section. | |
static void | generateCheckpointOut (const std::string &cpt_dir, std::ofstream &outstream) |
Generate a checkpoint file so that the serialization can be routed to it. | |
Public Attributes inherited from gem5::ClockedObject | |
PowerState * | powerState |
Definition at line 54 of file rv_ctrl.hh.
|
protected |
Definition at line 89 of file rv_ctrl.hh.
Enumerator | |
---|---|
FUNC_OSC | |
FUNC_VOLT | |
FUNC_AMP | |
FUNC_TEMP | |
FUNC_RESET | |
FUNC_SCC | |
FUNC_MUXFPGA | |
FUNC_SHUTDOWN | |
FUNC_REBOOT | |
FUNC_DVIMODE | |
FUNC_POWER | |
FUNC_ENERGY |
Definition at line 57 of file rv_ctrl.hh.
gem5::RealViewCtrl::RealViewCtrl | ( | const Params & | p | ) |
The constructor for RealView just registers itself with the MMU.
p | params structure |
Definition at line 51 of file rv_ctrl.cc.
|
protected |
|
protectedpure virtual |
|
protected |
gem5::RealViewCtrl::PARAMS | ( | RealViewCtrl | ) |
Handle a read to the device.
pkt | The memory request. |
data | Where to put the data. |
Implements gem5::PioDevice.
Definition at line 57 of file rv_ctrl.cc.
References CfgCtrl, CfgData, CfgStat, Clcd, Clock100, Clock24, gem5::curTick(), DPRINTF, Flags, flags, Flash, gem5::Packet::getAddr(), gem5::Packet::getSize(), IdReg, Lock, gem5::Packet::makeAtomicResponse(), gem5::sim_clock::as_float::MHz, Osc0, Osc1, Osc2, Osc3, Osc4, gem5::SimObject::params(), gem5::BasicPioDevice::pioAddr, gem5::BasicPioDevice::pioDelay, gem5::BasicPioDevice::pioSize, ProcId0, ProcId1, scData, gem5::Packet::setLE(), sysLock, and warn.
void gem5::RealViewCtrl::registerDevice | ( | DeviceFunc | func, |
uint8_t | site, | ||
uint8_t | pos, | ||
uint8_t | dcc, | ||
uint16_t | dev, | ||
Device * | handler ) |
Definition at line 219 of file rv_ctrl.cc.
References gem5::X86ISA::addr, dcc, dev, devices, fatal, func, pos, and site.
Referenced by gem5::RealViewCtrl::Device::Device().
|
overridevirtual |
Serialize an object.
Output an object's state into the current checkpoint section.
cp | Checkpoint state |
Reimplemented from gem5::ClockedObject.
Definition at line 207 of file rv_ctrl.cc.
References flags, and SERIALIZE_SCALAR.
|
overridevirtual |
Unserialize an object.
Read an object's state from the current checkpoint section.
cp | Checkpoint state |
Reimplemented from gem5::ClockedObject.
Definition at line 213 of file rv_ctrl.cc.
References flags, and UNSERIALIZE_SCALAR.
All writes are simply ignored.
pkt | The memory request. |
data | the data |
Implements gem5::PioDevice.
Definition at line 133 of file rv_ctrl.cc.
References CfgCtrl, CfgData, CfgStat, Clcd, dev, devices, DPRINTF, Flags, flags, FlagsClr, Flash, gem5::Packet::getAddr(), gem5::Packet::getLE(), Lock, gem5::Packet::makeAtomicResponse(), Osc0, Osc1, Osc2, Osc3, Osc4, gem5::BasicPioDevice::pioAddr, gem5::BasicPioDevice::pioDelay, gem5::BasicPioDevice::pioSize, ResetCtl, scData, sysLock, warn, and warn_once.
|
protected |
Definition at line 140 of file rv_ctrl.hh.
Referenced by gem5::RealViewCtrl::Device::Device(), and registerDevice().
|
protected |
Definition at line 136 of file rv_ctrl.hh.
Referenced by gem5::RealViewCtrl::Device::Device(), registerDevice(), and write().
|
protected |
Definition at line 192 of file rv_ctrl.hh.
Referenced by registerDevice(), and write().
|
protected |
This register is used for smp booting.
The primary cpu writes the secondary start address here before sends it a soft interrupt. The secondary cpu reads this register and if it's non-zero it jumps to the address
Definition at line 154 of file rv_ctrl.hh.
Referenced by read(), serialize(), unserialize(), and write().
|
protected |
Definition at line 139 of file rv_ctrl.hh.
Referenced by gem5::RealViewCtrl::Device::Device(), and registerDevice().
|
protected |
Definition at line 132 of file rv_ctrl.hh.
|
protected |
Definition at line 131 of file rv_ctrl.hh.
|
protected |
Definition at line 137 of file rv_ctrl.hh.
Referenced by gem5::RealViewCtrl::Device::Device(), and registerDevice().
|
protected |
This register contains the result from a system control reg access.
Definition at line 158 of file rv_ctrl.hh.
|
protected |
Definition at line 138 of file rv_ctrl.hh.
Referenced by gem5::RealViewCtrl::Device::Device(), and registerDevice().
|
protected |
Definition at line 142 of file rv_ctrl.hh.
|
protected |
Definition at line 147 of file rv_ctrl.hh.
|
protected |
Definition at line 141 of file rv_ctrl.hh.